 |
(AKRBMC) Ace AK Milled Internal Receiver Block (Sling Adapter included)This is a drop in part with no milling required to this part to fit into the receiver.
AK milled internal receiver block for milled receiver for all common milled receivers, (Including Bulgarian, Arsenal and Chinese).
DOES not fit Century Arms C39.
Note: modification of receiver necessary, both upper and lower tangs need to be removed.Simply cut the receiver Tangs flush and bolt this into the top of the trunnion and through the sides.
Side holes are drilled and tapped with mounting hardware included for an easy install.
Allows you to mount all Carolina Raptor, Ace, DPH, Red Jacket and Tromix Stocks with or without Folding Mechanisms.
Made of solid billet aluminum.
Designed with a 3 degree corrected stock angle so the stock is straight with the barrel, not angled down.
Made in the USA.
All screw hardware included.
Allows easy install of Carolina, ACE, DPH, and Tromix bolt on stocks.
Installation requires the firearms upper and lower tangs to be cut off flush with the receiver.
|
|
|
