|
|
|
|
|
Full power spring went in the rear |
September 14, 2022 |
Reviewer:
Ceelo from Atlanta, GA United States
|
|
Fixed my issues the factory spring is shorter and weaker. Full power spring in the rear and light spring in the front going into the bolt carrier. I should have probably replaced the springs first before drilling gas ports and opening up the gas block hole but the gas block was covering 2 holes slightly. Either way she runs great now low and high brass mixed together in one mag not a single problem now. FYI get a auto plug 2.0 and Tapco gas puck and Fixed my issues the factory spring is shorter and weaker. Full power spring in the rear and light spring in the front going into the bolt carrier. I should have probably replaced the springs first before drilling gas ports and opening up the gas block hole but the gas block was covering 2 holes slightly. Either way she runs great now low and high brass mixed together in one mag not a single problem now. FYI get a auto plug 2.0 and Tapco gas puck and you are good to go. you are good to go.
Was this review helpful to you?
|
|
|
|
|
|