Screws Spare Parts

Lower tension front recoil spring to help make your Saiga or VEPR shotgun more reliable with Low Brass shells.

(32)

Allows you to lock your muzzle brake in without Loctite.

(73)

Replaces your front recoil spring to make your Saiga shotguns more reliable.
Can be used with all 2-3/4" Shells.

(38)

High quality US made Cobalt bit.
Perfect for quickly drilling out rivets for conversions.

(7)

Replaces the factory MAG CATCH SPRING on AK style rifles

(10)

Replace your Extractor
Fits standard AK/AKM bolts

(24)

Used to secure the standard AK aftermarket grips (example ATI, Saw, MFT, CAA, Magpul, Hogue etc.).

(14)

Fits Saiga if you remove BHO or modify hammer

Industry standard AK47 main spring

(8)

Manual Bolt Hold Open Lever for AK47/AK74/AKM,
Saiga and VEPR Rifles.

(1)

Direct replacement for factory dust cover.

(15)

Replacement for factory AK47 firing pins.  Stainless Steel.

(16)

Fits standard AK/AKM bolts

(4)

Fits all AK/AKM hammers

Industry standard AK47 main spring

(8)

Replace your Extractor
Fits standard AK/AKM bolts

(14)

Replacement for factory AK47 firing pins.  Stainless Steel.

(17)

Grip screw for your AR15 grip.

Fits Near Your Takedown Pin & Keeps the Upper Section Snug and Tight Against the Lower.

(2)

Secures the trigger pins in place for all Vepr, Saiga Rifles, 410 and 20 gauge Shotguns and all AK47's.

(29)

Secures the trigger pins in place for the Saiga 12 Shotgun.

(5)

Secures the trigger pins in place for all Vepr, Saiga shotguns and Rifles and all AK47's.

(15)

Made in the USA-Direct replacement for all Saiga Shotguns and Rifles factory BHO Spring.

(6)

For all Saiga rifles and shotguns.
Fits VEPR 12
For VEPR rifles see seperate SKU

(6)

Replacement Set Screws

Fits Saiga, Vepr, Mak and all AK47 variants.

(11)

Firing Pin Retaining Pin

(14)

Firing Pin Retaining Pin

(13)

Replaces your worn out OEM recoil springs.

(10)

Replaces the factory Catamount 12 gas puc to give you 1 922r compliant part.

CSS G2 Performance Puc is engineered to keep your gas system working in optimum performance.

(12)

Replaces the factory Vepr 12 gas puc to give you 1 922r compliant part.

(3)

Replacement for Saiga 12, 20 and 410 shotguns gas block detent pin and spring.

(1)

Replacement Roll Pin set for the Saiga 12, 20 and 410 Gas Block

(1)

Use this M6x100mm bolt for standard AK pistol grips.

These are Metal Grip Nuts that hold your AK grips to the receiver.

LYNX owners, you must buy a new grip nut for aftermarket pistol grips.

(60)

Replaces your Guiderod, Rear Recoil Spring, and Guiderod holder to make your VEPR or Saiga shotguns more reliable.

(9)

Used to keep lower AK handguard in place without movement.

(11)

Used to keep upper AK handguard in place without movement.

(10)

5 pack of replacement 8/32x1/4" screws for securing the internal receiver block.

Dramatically smooths and improves trigger pull while maintaining the same factory full power striking force.
Can be adjusted easily.

(37)

Magazine Release Pin for the Saiga & Vepr 12.
2 Sizes for all models of these shotguns.

(4)

Replaces the factory Magazine Release for the Saiga & Vepr 12.

(2)

Replaces factory Magazine Release spring for the Saiga & Vepr 12.

(4)

Thicker than the Blue Buffer
0.50"

(26)

Protects your AK'47's, Saiga, Vepr rifles and shotguns.

(52)

Replaces your worn out OEM recoil spring in your AK47 rifle.

(6)

Modified to allow Safety to be installed and removed easily during conversions.

(6)

Used on the CSS and Chaos Tri-rails and Quad rails to secure to the Gas Block.

(3)

Used with the CSS and factory forearms to secure to the Gas Block.

(1)

Removes Debris and Carbon build up from your gas system.

(2)

Energize your 12 Gauge with these 3 new Springs

(5)

Replacement screw set of 2 10/32x1/2" Allen head screws for your folding mechanisms.

Spare set of 10/32 Allen head screws for the ACE, DPH, CSS "Raptor and Tromix stocks.

Upper AK handguard spring

(1)

Replacement for factory trigger pins.

(12)

Plugs needed to fill the holes left from moving your FCG for a pistol grip conversion.

(14)

Hardware can be used for securing your trigger guard to the receiver.

(2)

Replacement Disconnector Tube

(2)